平成17年度 研究成果

大野富生、Muhammad Subekti、工藤和彦、高松邦吉、中川繁昭、鍋島邦彦

ニューラルネットワークを用いたHTTR制御棒引き抜き試験の事前解析手法

日本原子力学会和文論文誌、第4巻、第2号、pp.115-126(2005)

T. Takeda

Safety Studies on Hydrogen Production System with A High Temperature Gas-cooled Reactor

Nuclear Engineering and Technology, Vol.37 No.6, pp.401-420 (2005)

J. Aihara, T. Hojo, S. Furuno, M. Ishihara, K. Sawa, H. Yamamoto and K. Hojou

Recrystallization behavior in SiC amorphized with He or Ne irradiation

Nucl. Instrum. Methods Phys. Res. B Vol. 241 pp. 559-562 (2005).

T. Hojo, H. Yamamoto, J. Aihara, S. Furuno, K. Sawa, T. Sakuma and K. Hojou

Radiation effects on yttria-stabilized zirconia irradiated with He or Xe ions at high temperature

Nucl. Instrum. Methods Phys. Res. B Vol. 242 pp. 536-542 (2005).

J. Aihara, K. Sawa, Y. Furuya, T. Hojo, S. Furuno, H. Yamamoto, K. Hojou and M. Ishihara

Gas Release of SiC Implanted Deuterium or Helium

J. Am. Ceram. Soc. Vol. 88 pp. 2319-2321 (2005).

S. Hanawa, M. Ishiharaa and Y. Motohashi

Analytical study on biaxial strength of structural ceramics under tension-compression condition

Key Engineering Materials, Vols. 297-300, pp40-46 (2005).

J. Sumita, T. Shibata, M. Ishihara, T. Iyoku and N. Tsuji

Anisotropic deformation effect on the fracture of core components made of two-dimensional C/C composite

Key Engineering Materials, Vols. 297-300, pp143-147 (2005).

M. Ishihara, M. Yamaji, S. Baba and S. Hanawa,

Buckling fracture of two-dimensional carbon-fiber reinforced carbon-matrix composite

Key Engineering Materials, Vols. 297-300, pp201-206 (2005).

T. Shibata, J. Sumita, S. Baba, M. Yamaji, M. Ishihara, T. Iyoku and N. Tsuji,

Basic concept on structural design criteria for zirconia ceramics applying to nuclear components,

Key Engineering Materials, Vols. 297-300, pp728-733 (2005).

J. Sumita, T. Shibata, M. Ishihara, T. Iyoku and N. Tsuji

Annealing effect of thermal conductivity on thermal stress induced fracture on nuclear graphite

Key Engineering Materials, Vols. 297-300, pp1698-1703 (2005).

Y. Motohashi, M. Kikuchi, T. Ito, T. Shibata, M. Ishihara and K. Sawa

Flat cavities formed in superplastically deformed 3Y-TZP and their effect on elongation

Proc. of M&P2005, June 19-22, Seattle, USA (SUP-05), (2005).

M. Nomura, S. Kasahara, H. Okuda and S. Nakao

Evaluation of the IS process featuring membrane techniques by total thermal efficiency

International Journal of Hydrogen Energy, Vol.30, Issues 13-14, pp.1465-1473 (2005).

M. Nomura, H. Okuda, S. Kasahara and S. Nakao

Optimization of the process parameters of an electrochemical cell in the IS process

Chemical Engineering Science, Vol.60, Issue 24, pp. 7160-7167 (2005).

S. Kasahara, R. Hino, S. Kubo, K. Onuki, M. Nomura and S. Nakao

Flowsheet study of the thermochemical water-splitting IS process for effective hydrogen production.

AIChE 2005 Spring National Meeting, April 10-14, 2005, Atlanta, Georgia, USA, paper No. 75A.

N. Sakaba, T. Matsuzawa, Y. Hirayama, S. Nakagawa, T. Nishihara and T. Takeda

Evaluation of permeated hydrogen through heat transfer pipes of the intermediate heat exchanger during the initial 950℃ operation of the HTTR,

2005 International Congress on Advances in Nuclear Power Plants (ICAPP 05), Seoul, Korea, May 15-19, 2005, Paper No. 5159.

A. Terada, S. Kubo, H. Okuda, S. Kasahara, N. Tanaka, H. Ota, A. Kanagawa, K. Onuki and R. Hino

Development Program of hydrogen production by thermo-chemical water splitting IS process.

13th International Conference on Nuclear Engineering (ICONE-13), May 16-20, 2005, Beijing, China, Paper No. 50183.

A. Kanagawa, S. Kasahara, A. Terada, S. Kubo, R. Hino, Y. Kawahara, M. Watabe, H. Fukui, K. Ishino and T. Takahashi

Conceptual design of SO3 decomposer for thermo-chemical Iodine-Sulfur process pilot plant.

ICONE-13, Paper No. 50451

H. Ota, A. Terada, S. Kubo, S. Kasahara, M. Hodotsuka, R. Hino, T. Inatomi, K. Ogura, M. Kobayashi and S. Maruyama

Conceptual design study on sulfuric-acid decomposer for thermo-chemical Iodine-Sulfur Process.

ICONE-13, Paper No. 50494.

H. Ohashi, T. Nishihara, T. Takeda and Y. Inagaki,

Component Tests on Research and Development of HTTR Hydrogen Production System

ICONE-13, Paper No. 50536.

T. Shibata, J. Sumita, S. Baba, M. Yamaji, M. Ishihara, K. Sawa and T. Iyoku

Tensile strength of two-dimensional C/C composite with its microstructure for nuclear application

2nd JSME/ASME International Conference on Materials and Processing 2005 (M&P2005), June 19-22, Seattle, U.S.A, CMC-11.

Y. Motohashi, M. Kikuchi, T. Ito, T. Shibata, M. Ishihara and K. Sawa

Flat cavities formed in superplastically deformed 3Y-TZP and their effect on elongation

M&P2005, SUP-05

T. Shibata , Y. Motohashi, M. Ishihara, K. Sawa, S. Baba, T. Ito and J. Sumita

Some Changes in Superplastic Behavior of 3Y-TZP Caused by Neutron Irradiation

M&P2005, SUP-08

N. Sakaba, Y. Tachibana, S. Nakagawa and S. Hamamoto

Structural integrity assessments of helium components in the primary cooling system during the safety demonstration test using the HTTR

18th International Conference on Structural Mechanics in Reactor Technology (SMiRT-18), August 7-12, 2005, Beijing, China, S03-1.

S. Katanishi and K. Kunitomi

Safety Evaluation on the Depressurization Accident in the Gas Turbine High Temperature Reactor (GTHTR300), 18th International Conference on Structural Mechanics in Reactor Technology (SMiRT-18)

August 7-12, 2005, Beijing, China, S03-2.

J. Sumita, T. Shibata, S. Nakagawa, S. Hanawa, T. Iyoku and M. Ishihara

Temperature evaluation of core components of HTGR at depressurization accident considering annealing recovery on thermal conductivity of graphite

SMiRT18, W101-6.

S. Hanawa, J. Sumita, T. Shibata, M. Ishihara, T. Iyoku and K. Sawa

Stress analysis of two-dimensional C/C composite components for HTGR's core restraint mechanism

SMiRT18, C06-1.

M. Goto, N. Nojiri and S. Shimakawa,

Nuclear data sensitivity in the HTGR design

12th International Conference on Emerging Nuclear Energy Systems (ICENES2005), Aug. 21-26, 2005, Brussels, Belgium

K. Takamatsu, S. Nakagawa and T. Iyoku

Analytical Results of Coolant Flow Reduction Test in the HTTR

11th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics (NURETH-11), Oct. 2-6, 2005, Avignon, France, Paper No. 283.

K. Hayashi, H. Ohashi, N. Morisaki, Y. Inaba and Y. Inagaki

Experimental Results of Start-up and Shutdown Test on HTTR Hydrogen Production System Using Mock-up Test Facility

International Conference on Nuclear Energy System for Future Generation and Global Sustainability (GLOBAL 2005), Oct.9-13, 2005, Tsukuba, Japan, paper 252.

M. Subekti, T. Ohno, K. Kudo, K. Takamatsu and K. Nabeshima

Full-Integrated System of Real-Time Monitoring Based on Distributed Architecture for High Temperature Engineering Test Reactor (HTTR)

N. Sakaba and Y. Hirayama

Helium chemistry in high-temperature gas-cooled reactors, Chemistry control for avoiding Hastelloy XR corrosion in the HTTR-IS system

GLOBAL 2005, Paper No.263.

T. Nishihara, H. Ohashi, T. Murakami and Y. Inagaki

Analytical Study on Hydrogen Dispersion in the HTGR Hydrogen Production System

GLOBAL 2005, Paper No.284.

T．Takeda, T. Nishihara and K. Kunitomi

Deployment Scenario of GTHTR300 Cogeneration System

GLOBAL 2005, Paper No.325.

T. Shibata, S. Hanawa, J. Sumita, T. Tada, K. Sawa and T. Iyoku

Non-destructive Evaluation on Mechanical Properties of Nuclear Graphite with Porous Structure

GLOBAL 2005, Paper No.360.

A. Terada, S. Kubo, H. Okuda, S. Kasahara, N. Tanaka, H. Ota, S. Ishikura, K. Onuk and R. Hino

Development of Hydrogen Production Technology by Thermo-Chemical Water Splitting IS Process.

GLOBAL 2005, Paper No.427.

S. Kubo, H. Nakajima, S. Shimizu, K. Onuki, and R. Hino

A Bench Scale Hydrogen Production Test by the Thermochemical Water-splitting Iodine-Sulfur Process.

GLOBAL 2005, Paper No.474.

S. Shiozawa, M. Ogawa and R. Hino

Development Status on Hydrogen Production Technology Using High-Temperature Gas-Cooled Reactor at JAEA, Japan

European Nuclear Conference 2005 (ENC2005), Versailles, France, Dec. 11-14, 2005, Paper No. 225.

塩沢周策、日野竜太郎

原子力水素生産への期待・展望

原子力eye、Vol.51、No.11、2005年11月号

久保真治、吉田光徳、桜井 誠、田中耕太郎、宮下礼子

熱化学水素製造法ISプロセスと分離技術

分離技術、Vol.35、No.3、pp.148-152 (2005年5月)

笠原清司、久保真治、小川益郎

高温ガス炉核熱を用いた熱化学水素製造法の研究開発

伝熱、Vol.44、No.188、9月号、pp.25-30 (2005年9月)

寺田敦彦

機械学会年鑑(10．動力　10．3　原子力発電　10．3．1　日本の原子力発電の動向)

日本機械学会誌、第108巻、第1041号、pp.42(2005).

小貫薫、塩沢周策

水の熱化学的分解

「水素エネルギーと材料技術」、シーエムシー出版、2005年4月　　(分担執筆)

寺田敦彦、小貫薫、日野竜太郎

原子力(高温ガス炉)からの水素

「水素利用技術集成Vol.2」、エヌ・ティー・エス出版、2005年5月　(分担執筆)

榊明裕、加藤道雄、林光二、藤崎勝夫、会田秀樹、大橋弘史、高田昌二、清水明、森崎徳浩、前田幸政、佐藤博之、塙博美、米川日出男、稲垣嘉之

HTTR水素製造システム実規模単一管反応試験装置の改善事項

JAERI-Tech 2005-023 (2005).

高松邦吉、中川繁昭

高温ガス炉における原子炉出口冷却材温度の評価手法の提案

JAERI-Tech 2005-030 (2005).

清水明、大橋弘史、加藤道雄、林光二、会田秀樹、西原哲夫、稲葉良知、高田昌二、森崎徳浩、榊明裕、前田幸政、佐藤博之、稲垣嘉之、塙博美、藤崎勝夫、米川日出男

HTTR水素製造システム実規模単一管反応試験装置の熱交換器の伝熱性能評価結果

JAERI-Tech 2005-031 (2005).

林光二、稲垣嘉之、加藤道雄、藤崎勝夫、会田秀樹、武田哲明、西原哲夫、稲葉良知、大橋弘史、片西昌司、高田昌二、清水明、森崎徳浩、榊明裕、前田幸政、佐藤博之

HTTR水素製造システム実規模単一管反応試験装置　平成13年度試験運転報告(受託研究)

JAERI-Tech 2005-032 (2005).

高田昌二、滝塚貴和、Yan Xing, 黒河内直浩、國富一彦

高温ガス炉ガスタービン発電システム(GTHTR300)用ヘリウムガス圧縮機インレットディストーションによる性能への影響評価

JAEA-Technology 2005-007 (2005).

高松邦吉、中川繁昭

TAC/BLOOSTコードの検証

JAERI-Data/Code 2005-003 (2005).

N. Sakaba, Y. Tachibana, K. Onuki, Y. Komori and M. Ogawa

JAERI’s hot stuff,

Nuclear Engineering International, Vol.50, No.612, pp.20-22, (2005).

Y. Motohashi, T. Shibata, S. Harjo. T. Sakuma, M. Ishihara, S. Baba and K. Sawa

Effects of Zr ion irradiation and subsequent annealing on superplastic ceramic 3Y-TZP

JAERI TANDEM Annual Report 2004 (p.83), JAEA Review 2005-004

A. Kurumada, Y. Imamura, T. Oku, M. Ishihara, K. Sawa, T. Shibata and S. Baba

J. Aihara: Annealing effect on electric resistivity of ion irradiated carbon fibers

JAERI TANDEM Annual Report 2004 (p.101), JAEA Review 2005-004.

S. Nakagawa, N. Sakaba, K. Takamatsu, E. Takada, D. Tochio and H. Owada

Safety Demonstration Test (SR-3/S1C-3/S2C-3/SF-2) Plan using the HTTR (Contract Research)

JAERI-Tech 2005-015