Results for FY '06

Home
Results
FY '06

Papers
International Conference
Reports

Papers

T. Nishihara and I. Inagaki: Development of control technology for the HTTR hydrogen Production System; Nuclear Technology, Vol.153, pp100-106 (2006)

J. Aihara, K. Hojou, S. Furuno, K. Shimura, T. Hojo, K. Sawa, H. Yamamoto and Y. Motohashi: Microstructural change with annealing of SiC irradiated with Ne at 573-673K; Nucl. Instrum. Methods Phys. Res. B Vol. 242, pp. 441-444 (2006).

T. Hojo, H. Yamamoto, J. Aihara, S. Furuno, K. Sawa, T. Sakuma and K. Hojou: Radiation effects on MgAl2O3-stabilized zirconia composite material irradiated with Ne+ ions; Nucl. Instrum. Methods Phys. Res. B Vol. 242 pp.476-479 (2006).

S. Kasahara, K. Onuki, M. Nomura and S. Nakao: Static Analysis of the Thermochemical Hydrogen Production IS Process for Assessment of the Operation Parameters and the Chemical Properties; Journal of Chemical Engineering of Japan, vol.39, No.5, pp.559-568 (2006).

M. Itoh, S. Tamano, R. Iguchi, K. Yokota, N. Akino, R. Hino and S. Kubo: Turbulent drag reduction by the seal fur surface; Physics of Fluids, vol.18, 065102 (2006).

T. Hojo, H. Yamamoto, J. Aihara, S. Furuno, K. Sawa, T. Sakuma, K.. Hojou: Loop formation by ion irradiation in yttria stabilized zirconia; Nuclear instruments & methods in physics research Section B 250 pp101-105 (2006)

T. Hojo, H. Yamamoto, J. Aihara, S. Furuno, K. Sawa, T. Sakuma, K. Hojou: Radiation effects on MgAl2O4- yttria stabilized ZrO2 composite material irradiated with Ne+ ions at high temperature; Nuclear instruments & methods in physics research Section B 250 pp123-127 (2006)

H. Ohashi, Yoshitomo Inaba, Tetsuo Nishihara, Tetsuaki Takeda, Koji Hayashi, Shoji Takada and Yoshiyuki Inagaki,: Development of control technology for HTTR hydrogen production system with mock-up test facility - System controllability test for loss of chemical reaction-", Nuclear Engineering and Design, Vol. 236,; Issue 13, P1396-1410, (2006).

N. Sakaba, H. Ohashi, T. Takeda,: Hydrogen permeation through heat transfer pipes made of Hastelloy XR during the initial 950°C operation of the HTTR", Journal of Nuclear Materials, Vol.353, pp.42-51, (2006).

International Conference

S. Shimakawa, M. Goto and Y. Nagaya: Impact of Nuclear Data on Design Work for High Temperature Gas-cooled Reactors; 2005 Symposium on Nuclear Data, February 2-3, 2006, Tokai, Japan, JAEA-Conf 2006-009, p.25

H. Okuda, T. Yamaki and S. Kubo: Improvement of the Thermal Efficiency of Hydrogen Iodide Concentration in I-S Process by Using Radiation-Induced Polymerized Membrane in Electrodialysis System; AIChE 2006 Spring National Meeting, April 23-27, 2006, Orlando, FL, USA, paper No. 182d.

N. Sakaba, S. Kasahara, H. Ohashi, A. Terada, S. Kubo, K. Onuki, K. Kunitomi,: Hydrogen Production by using Heat from High-temperature Gas-Cooled Reactor HTTR; HTTR-IS Plan; 2006 International Congress on Advances in Nuclear Power Plants (ICAPP '06), June 4-8, 2006, Reno, NV. US, paper No. 6024

H. Noguchi, H. Ota, A. Terada, S. Kubo and R. Hino: Development of Sulfuric Acid Decomposer for Thermo-Chemical IS Process; 2006 International Congress on Advances in Nuclear Power Plants (ICAPP '06), June 4-8, 2006, Reno, NV, USA, paper No.6166.

S. Kubo, M. Futakawa, N. Tanaka, J. Iwatsuki, A. Yamaguchi, R. Tsukada and K. Onuki: Corrosion Rate Evaluations of Structural Materials for A Iodine-Sulfur Thermochemical Water-Splitting Cycle; 2006 International Congress on Advances in Nuclear Power Plants (ICAPP '06), June 4-8, 2006, Reno, NV, USA, paper No.6170.

N. Sakaba, S. Kasahara, H. Ohashi, H. Sato, S. Kubo, A. Terada, T. Nishihara, K. Onuki, K. Kunitomi: Hydrogen production by thermochemical water-splitting IS process utilizing heat from high-temperature reactor HTTR; 16th World Hydrogen Energy Conference (WHEC), June 13-16, 2006, Lyon France, S04-043

J. Iwatsuki, A. Terada, H. Noguchi, Y. Imai, M. Ijichi, A. Kanagawa, H. Ota, S. Kubo, K. Onuki and R. Hino: Development Program of IS Process Pilot Test Plant for Hydrogen Production with High-Temperature Gas-Cooled Reactor; 14th International Conference on Nuclear Engineering (ICONE14), July 17-20, 2006, Miami, FL, USA, ICONE14-89267.

J. Sumita, S. Hanawa, T. Shibata, T. Tada, T. Iyoku and K. Sawa: Analytical Study on Micro-indentation Method to Integrity Evaluation for Graphite Components in HTGR; 14th International Conference On Nuclear Engineering (ICONE14), July 17-20, 2006, Miami, FL, USA, ICONE14-89384.

T. Takeda, X. Yan and K. Kunitomi: Numerical Analysis on Air Ingress Behavior in GTHTR300H; 14th International Conference on Nuclear Engineering (ICONE14), July 17-20, Miami, Florida, USA, ICONE14-89673.

K. Sawa, S. Ueta and J. Aihara: Present status of ZrC coated fuel particle development for Very High Temperature Reactors in JAEA; Nuclear Fuels and Structural Materials for the Next Generation Nuclear Reactor, USA (2006)

H. Nabielek, K. Verfondern, C. Tang and S. Ueta: Burn-leach: The Most Important Test in the Manufacture of HTGR Fuel; Nuclear Fuels and Structural Materials for the Next Generation Nuclear Reactor, USA (2006)

T. Shibata, J. Sumita, T. Tada, S. Hanawa, K. Sawa, T. Iyoku: Non-destructive evaluation methods for degradation of IG-110 and IG-430 graphite; 7th International Nuclear Graphite Specialists Meeting, Sept. 10-13, 2006, Oak Ridge, Tennessee, USA.

K. Takamatsu, S. Nakagawa and T. Takeda: Development of Core Dynamics Analysis of Coolant Flow Reduction Tests of HTTR; 3rd International Topical Meeting on High Temperature Reactor Technology (HTR2006), Oct. 1-4, 2006, Johannesburg, South Africa. C-174

T. Nishihara, K. Kunitomi and T. Murakami: Study on the separation distance in the HTGR hydrogen production system (GTHTR300); 3rd International Topical Meeting on High Temperature Reactor Technology (HTR2006), Oct. 1-4, 2006, Johannesburg, South Africa, I-126

K. Onuki, S. Kubo, A. Terada, N. Sakaba, J. Iwatsuki, H. Okuda, S. Kasahara, N. Tanaka, Y. Imai, H. Noguchi and R. Hino: R&D on Thermochemical Water-Splitting Iodine-Sulfur Process for Hydrogen Production; 16th Iketani Conference, Masuko Symposium, November 12-16, 2006, Tokyo, Japan, 1-B-2K.

Results